Construction Craft Laborer (CCL)

Time-Based Apprenticeship
Sponsoring Company:
Laborers’ International Union of North America and the Associated General Contractors of America
Industries
O*Net Code
47-2061.00
Rapids Code
0661R
Req. Hours
184000
State
DC
Created
Apr 29, 2021
Updated
Apr 29, 2021

Time-Based Skills

16 skill sets | 100 total skills | 184000 total hours
Site preparation, layout, cleanup and security - 400 req. hrs
400 hrs
Use and understand basic blueprint symbols and views - 425 req. hrs
25 hrs
Recognize, secure and maintain job site safety - 925 req. hrs
500 hrs
Identify and work safely around environmental hazards - 950 req. hrs
25 hrs
Erect, dismantle, maintain and work from scaffold or lifts - 1050 req. hrs
100 hrs
Operate and maintain hand and power tools - 1350 req. hrs
300 hrs
Operate and maintain equipment as required by the job - 1475 req. hrs
125 hrs
Identify, estimate, move, supply, stock, and store materials - 1975 req. hrs
500 hrs
Use appropriate hand signals - 2000 req. hrs
25 hrs
Building Construction Concentration - 32000 req. hrs
Concrete placement - mixing, placement, vibration of concrete, build and place forms, remove and clean forms, cure concrete
2000 hrs
Pipe laying and making of connections for any utility piping
2000 hrs
Hoisting and rigging
2000 hrs
Cutting and burning
2000 hrs
Traffic control/flagging
2000 hrs
Trenching and excavating
2000 hrs
Grade setting/checking
2000 hrs
Clearing, bucking and falling
2000 hrs
Site preparation/cleanup and security
2000 hrs
Layout and staking
2000 hrs
Erect, dismantle and maintain scaffold
2000 hrs
Identify, inspect, use and maintain all tools
2000 hrs
Install erosion control systems
2000 hrs
Forklift operation
2000 hrs
Aerial lift operation
2000 hrs
Heavy/Highway and Utility Construction Concentration - 68000 req. hrs
Concrete placement - mixing, placement, vibration of concrete, build and place forms, remove and clean forms, cure concrete
2000 hrs
Concrete cutting and coring
2000 hrs
Pipe laying and making of connections for any utility piping
2000 hrs
Hoisting and rigging
2000 hrs
Traffic control/flagging
2000 hrs
Trenching and excavating
2000 hrs
Grade setting/checking
2000 hrs
Layout and staking
2000 hrs
Site preparation/clean up and security
2000 hrs
Drilling
2000 hrs
Asphalt - raking, placement, compaction and preparation of the base
2000 hrs
Build railroad beds and all related bridges and tunnels, and install tracks
2000 hrs
Erect, dismantle and maintain scaffold
2000 hrs
Identify, inspect, use and maintain all tools
2000 hrs
Install erosion control systems
2000 hrs
Forklift operation
2000 hrs
Aerial lift operation
2000 hrs
Site/roadside remediation
2000 hrs
Masonry Concentration - 82000 req. hrs
Erect/dismantle and maintain scaffold
2000 hrs
Estimate, stock and maintain supply areas
2000 hrs
Identify, inspect, use and maintain tools
2000 hrs
Forklift operation
2000 hrs
Aerial lift operation
2000 hrs
Mason tender/plaster tender
2000 hrs
Clean masonry walls
2000 hrs
Demolition and Deconstruction Concentration - 104000 req. hrs
Identify and work safely around environmental hazards
2000 hrs
Erect/dismantle and maintain scaffold
2000 hrs
Cutting and burning
2000 hrs
Hoisting and rigging
2000 hrs
Trenching and excavating
2000 hrs
Aerial lift operation
2000 hrs
Site preparation/cleanup and security
2000 hrs
Identify, inspect, use and maintain all tools
2000 hrs
Fire watch
2000 hrs
Concrete cutting and sawing
2000 hrs
Demolition debris handling and management (recycling, reuse, disposal)
2000 hrs
Pipeline Concentration - 148000 req. hrs
Hoisting and rigging
2000 hrs
Trenching and excavating
2000 hrs
Site preparation/cleanup and security
2000 hrs
Identify, inspect, use and maintain all tools specific to the concentration
2000 hrs
Grade setting/checking
2000 hrs
Layout and staking
2000 hrs
Clearing and maintaining the right of way (ROW)
2000 hrs
Pump water
2000 hrs
Locate utilities
2000 hrs
Build and dismantle fences
2000 hrs
Load and unload pipe
2000 hrs
Fill and place sandbags
2000 hrs
Load, unload and place skids
2000 hrs
Install erosion control systems
2000 hrs
Pipe surface preparation/sand blasting
2000 hrs
Apply pipe coating
2000 hrs
Inspect pipe coating visually and with a holiday detector
2000 hrs
Patch coating
2000 hrs
Install pipe coating protection
2000 hrs
Install corrosion protection
2000 hrs
“Pig” the pipe
2000 hrs
ROW remediation
2000 hrs
Tunneling Concentration - 166000 req. hrs
Drilling
2000 hrs
Identify, inspect, use and maintain all tools specific to the concentration
2000 hrs
Hoisting and rigging
2000 hrs
Concrete pump operation and maintenance
2000 hrs
Install services (track laying, conveyors, vents, water, compressed air pipes etc.)
2000 hrs
Install tunnel supports (steel ribs, mesh, rock bolts)
2000 hrs
Shaft and tunnel grouting
2000 hrs
Shotcrete/gunite application
2000 hrs
Cutting and burning
2000 hrs
Environmental Remediation Concentration - 184000 req. hrs
Asbestos abatement
2000 hrs
Hazardous waste remediation
2000 hrs
Lead abatement
2000 hrs
Microbial remediation
2000 hrs
Radiation protection/radioactive material handling
2000 hrs
Water damage/fire restoration
2000 hrs
Erect, dismantle and maintain scaffold
2000 hrs
Identify, inspect, use and maintain all tools specific to this concentration
2000 hrs
Aerial lift operation
2000 hrs

Technical Instruction

CCL Core: Blue Print Reading
Blue Print Reading training is designed to introduce participants to the basics of reading and interpreting blueprints. Topics covered include symbols, line conventions, views, and basic plan reading techniques.
# | 40 hrs
CCL Core: Confined Space Awareness
Confined Space Awareness training covers information necessary to recognize the special hazards associated with confined spaces. Topics covered include the characteristics of confined spaces, hazardous atmospheres, pre-entry and periodic testing, continuous monitoring and the laws that protect those working in confined spaces.
# | 4 hrs
CCL Core: Craft Orientation
Craft Orientation training introduces participants to the construction industry in general and a career as a CCL in particular. Emphasis is placed on developing good work habits, being productive on the job, working under a collective bargaining agreement, being aware of growth areas in construction employment, and background information on the LIUNA and its related funds. Participants are also introduced to the history of the labor movement in general, and of LIUNA in particular. Emphasis is placed on the origin of the union and the challenges that have been faced and overcome from its beginning to the present.
# | 8 hrs
CCL Core: Fall Protection
Fall Protection training summarizes the key points of OSHA’s fall protection standard and common citations issued for non-compliance. The program looks at the hazards and key safety issues related to fall protection and the safety practices used to prevent falls.
# | 4 hrs
CCL Core: First Aid/CPR
First Aid/CPR training is designed for participants to learn first aid skills for treating a variety of injuries, such as burns, wounds, head, neck and back injuries, and heat and cold emergencies. Participants also learn to manage sudden illnesses, strokes, seizures, animal and insect bites and poisoning. Adult CPR teaches participants how to perform CPR and care for breathing and cardiac emergencies in adults.
# | 8 hrs
CCL Core: General Construction
General Construction training introduces participants to a wide variety of concepts, tools, and skills that are important to successfully begin a career as a CCL. Participants receive instruction on the work and the role of a CCL, commonly encountered safety issues, measurement in construction, basic construction math, safe hand and power tool operation, and identification and handling of materials frequently used in construction.
# | 80 hrs
CCL Core: Hazard Communication
Hazard Communication training introduces CCLs to the OSHA Hazard Communication Standard as it applies to the construction industry. Training focuses on the guidelines for recognizing and protecting oneself from exposure to hazardous substances, including identifying chemical hazards and the proper use of container labels and placards. In addition, participants learn how to read and understand material safety data sheets.
# | 8 hrs
CCL Core: OSHA Construction Safety and Health
requirements for OSHA’s 10-hour training program. The program provides safety and health information as it relates to the many hazards found on construction projects and offers insight into ways to reduce them.
# | 11 hrs
CCL Core: Scaffold User
Scaffold User training presents a variety of scaffold types, the hazards associated with each, and how to figure load capacities and their effect on scaffold performance.
# | 8 hrs
CCL Core: Flagger
Flagger training provides information to participants about flagger safety procedures on highway work zone projects. Participants are provided with information to help them demonstrate proper procedures for stopping, slowing, and releasing traffic. Topics include communication methods for two-person flagging operations, the correct positioning of flaggers in work zones, the proper high visibility clothing that must be worn by flaggers, and when specific hand- signaling devices should be used.
# | 4 hrs
Mason/Brick/Plaster Tending
Mason/Brick/Plaster Tending training provides instruction on the mason tender’s duties, proper job task performance, and health and safety issues associated with mason tending. Participants use mathematical and scientific concepts to achieve an understanding of working with masonry units, mortars, plasters, and admixtures. In addition, the fundamentals of cutting and cleaning masonry and tending plasterers are covered.
# | 56 hrs
Rough Terrain Forklift
Rough Terrain Forklift training complies with OSHA 1926.602(c) requirements, teaches participants about the hazards involved with operating a forklift, and explains what they can do to prevent accidents and injuries when operating these forklifts. Participants have ample opportunity to operate a forklift.
# | 16 hrs
Scaffold Builder
Scaffold Builder training addresses the needs of CCLs who are responsible for building scaffolding on the jobsite or are required to perform job tasks while using scaffolding. Designed to meet the training requirements of 29 CFR Part 1926.454, the comprehensive program includes frame, tube and coupler, systems, non-powered adjustable and powered mast-climbing scaffold with hands-on training for each.
# | 72 hrs
Aerial Lift
Aerial Lift training provides participants with a general understanding of the safe and efficient operation of “Power Operated Mobile Work Platforms.” Participants learn to identify specific health and safety hazards associated with a variety of aerial work platforms. Aerial Lift training also provides participants the opportunity to operate aerial lifts in a safe manner.
# | 8 hrs
Hoisting and Rigging
Hoisting and Rigging training is designed to educate CCLs in the rules, processes, and procedures to safely rig, signal, and hoist loads on construction projects. The program incorporates federal regulatory requirements as well as equipment manufacturers’ standards. Training provides participants the opportunity to practice rigging and signaling.
# | 40 hrs
Demolition/Deconstruction
Demolition/Deconstruction training introduces participants to the similarities and differences of demolition and deconstruction work. Particular attention is paid to safety in all aspects of the work. Topics covered include planning projects, mechanical demolition equipment, material handling, site control, and special conditions that sometimes exist during this work.
# | 40 hrs
Fire Watch
Fire Watch training teaches participants what a fire watch is, how it is conducted, and why it is important. Topics covered include classifications of fires, preventing fires, types of extinguishers, and extinguishing fires.
# | 4 hrs
Cutting and Burning
Cutting and Burning training provides participants with an understanding of how to safely use heat to cut different types of metals using a variety of methods. Topics covered include the personal protective equipment (PPE) necessary for each process, the types and health effects of various fumes given off during the process, and how to protect the area from fire hazards. Participants will also be able to identify the components of the cutting systems and how to properly assemble and disassemble the systems. Systems taught include oxy- acetylene, oxy-gasoline, and plasma arc cutting. Hands on training is included for each system.
# | 24 hrs
Concrete
Concrete training provides the basic knowledge and skills CCLs need to work safely and productively in this potentially hazardous field. Safety issues associated with the mixing, forming, placement, and curing of concrete materials are covered, as well as the associated skills needed to complete these tasks. Ample time is given for hands- on practice for all skills.
# | 40 hrs
Pipe Laying
Pipe Laying training prepares CCLs to safely install pipe systems by introducing participants to the tools, equipment, and techniques typically used on a pipe laying job. Special attention is paid to proper work practices and protective measures used to install a variety of piping systems safely. Ductile iron, concrete, and high-density polyethylene piping are all covered, and hands-on training is available for each.
# | 40 hrs
Line and Grade
Line and Grade training focuses on the skills, knowledge, and aptitude necessary to operate a variety of surveying instruments and record information for maintaining elevation and alignment control points on heavy and civil construction projects.
# | 40 hrs
Asphalt
Asphalt training provides CCLs with the information they need to understand the safety precautions necessary when working with, raking and placing asphalt. In addition, participants practice the preparation of the surface, job preparation, and cleaning of the tools, and machinery. The patching of pot-holes and cracks is practiced along with proper raking techniques.
# | 32 hrs
Traffic Control
Traffic Control training provides participants with an understanding of the types of traffic control devices and how they are used set-up and dismantled. Topics include the purpose of the Manual of Uniform Traffic Control Devices (MUTCD) and the methods to maintain pedestrian safety in traffic control zones.
# | 8 hrs
Pipeline
Pipeline training instructs CCLs on the safe practices and procedures that need to be used on pipeline construction projects. All phases of pipeline construction are covered including the front-end work, pipe handling, pipe coating, and back-end work.
# | 80 hrs
Shotcrete
Shotcrete training is designed to prepare participants to become certified Shotcrete Nozzlemen. Participants practice wet and dry mixing methods for below ground uses. Instruction also includes nozzle types and their maintenance and use. Hands-on opportunities to practice applying shotcrete are included.
# | 80 hrs
Tunnel Worker
Tunnel Worker training prepares CCLs to work safely and productively on a tunnel job. Topics covered include tunnel safety, an overview of tunnel construction, the duties of a CCL tunnel worker, and compressed air systems.
# | 80 hrs
Drilling
The Drilling Operations program includes an introduction to drilling operations, how drilling operations work (construction applications, quarry applications, hand signals, and drill strings), how to operate and maintain the drill, and hands-on practice of drilling operations.
# | 16 hrs
Asbestos Worker
Asbestos Abatement Worker training prepares CCLs to work safely and productively on asbestos abatement projects. The program is designed to meet or exceed Occupational Safety and Health Administration and Environmental Protection Agency (EPA) training requirements under 29 CFR Part 1926.1101 and 40 CFR Part 763 respectively.
# | 40 hrs
Hazardous Waste Worker
Hazardous Waste Worker training prepares CCLs to work safely and productively on hazardous waste remediation projects. The program meets all Occupational Safety and Health Administration training requirements under 29 CFR Part 1910.120 – Hazardous Waste Operations and Emergency Response.
# | 80 hrs
Microbial Remediation
Microbial Remediation training instructs CCLs on the health hazards, PPE requirements, and remediation processes and techniques associated with the removal of mold as well as other microbial contamination.
# | 24 hrs
Lead Abatement Worker
Lead Abatement Worker training prepares CCLs to work safely and productively on lead abatement projects. The course meets all Occupational Safety and Health Administration and Environmental Protection Agency training requirements under 29 CFR Part 1926.62 and 40 CFR Part 745.225 respectively.
# | 40 hrs
Landscaping
Landscaping training provides CCLs with the knowledge and skills they need to work as a landscaper with a concentration on using environmentally-friendly techniques whenever possible. Topics covered include the landscape laborer’s duties; safety hazards of landscape work; safe use of pesticides, herbicides and fertilizers with an emphasis on using environmentally-friendly materials; controlling erosion on the jobsite; and planting and maintaining sod, grass, shrubs and trees.
# | 40 hrs
Landscape Equipment Operation
Landscape Equipment Operation training teaches CCLs how to safely and productively operate a skid steer, a trencher, and a mini excavator. Topics include safety, operation and maintenance procedures, along with ample time devoted to hands-on practice with the equipment.
# | 40 hrs
Brick Paver Installation
Brick Paver Installation training provides CCLs with the knowledge and skills they need to install walkways and patios with brick pavers. Topics covered include the hazards associated with installing brick pavers; laying out the work; estimating the amount of pavers required; preparing the base; cutting bricks accurately and to minimize waste; and installing pavers correctly. Ample time is devoted to hands-on practice with all the job tasks.
# | 40 hrs
Retaining Wall Installation
Retaining Wall Installation training provides CCLs with the knowledge and skills they need to install retaining walls for landscape work. Topics covered include the hazards associated with installing a retaining wall; the different types of retaining wall materials; laying out the retaining wall; estimating the amount of materials required; preparing the base; tying the wall back to the bank; and correct installation techniques for retaining wall blocks and timbers.
# | 40 hrs
Irrigation Installation
Irrigation Installation training provides CCLs with the knowledge and skills they need to install irrigation systems. Topics covered include an overview of irrigation systems, with a focus on identifying those that best conserve water; the hazards associated with installing irrigation systems; how irrigation systems are best laid out for maximum efficiency; and how to maintain irrigation systems once they are installed. Ample time is devoted to hands-on practice assembling and installing an irrigation system.
# | 40 hrs
Aboveground Drilling
Aboveground Drilling training introduces CCLs to the unique working environment of aboveground drilling by providing instructor facilitated classroom instruction along with intensive, performance-based, hands- on training. The care and use of tools and equipment is presented, as well as drilling techniques. Basic information about rocks and their composition and characteristics are introduced, as drillers must know how geology affects the drilling process. The personal safety of CCLs working on a drilling site is reviewed in depth. Site safety, hazard communication, health hazards, personal protective equipment, and working around explosives are also covered.
# | 32 hrs
Construction Math
Construction Math training introduces CCLs to the basic math skills needed to perform calculations related to distance, area, volume, angles, and weight and measurement on construction projects. Participants are provided instruction and an ample opportunity to measure objects, calculate and perform basic math functions including addition, subtraction, multiplication, and division of whole and fractional numbers, measure and estimate volumes, convert fractions to decimals, (and decimals to fractions). In addition participants learn practical applications of the Pythagorean Theorem, formulas for calculating perimeters, area, volume, and the use and function of square roots.
# | 40 hrs
Disaster Site Worker
Disaster Site Worker training prepares CCLs to safely and effectively work on disaster sites. It provides participants with an understanding of the Incident Command System (ICS) and how it relates to safe and efficient job performance, addresses the characteristics and hazards of man-made and natural disasters, and affords opportunities to learn and demonstrate different disaster response related skills, including use of PPE.
# | 16 hrs
Green Construction
Green Construction training provides CCLs with information about the major factors that affect a green construction project including conservation of natural resources; reduction of carbon emissions; water resource use and conservation; reduction of soil, water and air pollution; and indoor air quality. Participants learn how these emerging issues influence their work and the potential future impact of growth in renewable energy, sustainable buildings, and green construction.
# | 16 hrs
Green Roofs
Green Roof training introduces participants to the various types of green roofs, the safety hazards associated with the installation of green roofs, and the practices and procedures used during installation of the roof.
# | 24 hrs
Lead and Silica in Bridges
Lead and Silica in Bridges training is designed to provide instruction to CCLs on two (2) common hazards found on bridge (and other construction) projects: lead and silica exposure. Emphasis is placed on the health hazards, PPE, regulations, and hazard mitigation methods.
# | 16 hrs
Lead Renovator
Lead Renovator training prepares participants to perform renovation work using lead safe work practices. It meets all EPA and OSHA training requirements under 40 CFR Part 745.225 and 29 CFR Part 1926.62. Lead Renovator training is mandatory for all workers conducting renovation activities where lead-based paint is present in target housing and child occupied facilities. Students participate in active learning through classroom exercises and hands-on training.
# | 16 hrs
Material Hoist Attendant – “Bell Ringer”
Material Hoist Attendant training provides training on the roles and responsibilities of the material hoist attendant (bell ringer) and inspection, operation, and maintenance procedures for material hoists used on construction projects.
# | 8 hrs
Metric Measurement in Construction
Metric Measurement in Construction training introduces experienced CCLs and new entrants to the metric system of measurements and application in the construction industry. Units of measure and conversions using practical applications are covered. Participants practice real-world measuring techniques in practical situations.
# | 8 hrs
Nuclear Power Plant Worker
Nuclear Power Plant Worker training is designed for CCLs involved in maintenance and shutdown activities at nuclear power plants or whose job assignments involve unescorted entry into areas controlled for radiological purposes. This program is divided into nine topics, which focus on the theory, basic radiological fundamentals, and the terms CCLs must know to work safely around radiological hazards.
# | 32 hrs
Permit Required Confined Space
Permit Required Confined Space training focuses on the identification of the different types of confined spaces as well as their associated hazards. Participants receive detailed instruction on rules, regulations, and procedures to be followed when entering a confined space as well as methods to mitigate the associated hazards.
# | 24 hrs
Radiation Remediation
Radiation Remediation training provides CCLs with the information they need to work safely in and around radiological contaminated sites. Hands-on training is conducted in a mock training area. Respiratory protection and protective clothing and why they are required are also covered in this training.
# | 24 hrs
Respiratory Protection
Respiratory Protection training details the correct use of respirators when airborne hazardous substances are present. Topics include using exposure guides, respirator selection, proper use of respirators, and OSHA respiratory protection program requirements.
# | 8 hrs
Restoration Technician
Restoration Technician training focuses on commercial clean-up activities associated with fire and/or flood damaged structures. The Restoration Technician course is designed for participants who have received previous training in hazardous waste remediation, asbestos, and lead abatement as this course centers on the theory, application, and practices associated with restoration projects.
# | 8 hrs
Silica Awareness
Silica Awareness training provides information to CCLs regarding the hazards associated with work activities such as concrete sawing or stone cutting of materials, which contain silica.
# | 8 hrs
Solar Panel Installation
Solar Panel Installation training teaches the proper system sizing, design, prep work and installation of mounting brackets for photovoltaic (PV) systems, installation of mounting brackets and tubes for hot water systems and involves actual hands-on work associated with roof top, side of building and ground mounted applications.
# | 16 hrs